Sublimation 12oz soda can

Screw on lids with flip up spouts make this soda can style insulated stainless steel tumblers one of our favorites. Straight sides make sublimation easy in some styles of mug press or your regular convection oven. 

IN A CONVECTION OVEN (with Shrink Wrap):

 Because not all ovens are created equally the dwell time in an oven can
range from 4.5 to 6 minutes. Convection oven is recommended. Settings will
vary depending on the oven brand and model ink and paper and atmospheric conditions.

Tip: Be sure that the artwork does not go beyond the size limits of the
wrap.

Supplies needed:
- sublimatable substrate
- sublimation transfer
- shrink wrap
- heat gun
- heat tape
- convection oven

Oven settings:
- temperature - 350 degrees F
- dwell time - 4.5 to 6 minutes

STEPS:
1. Position transfer onto the substrate using heat tape to secure the transfer
to the substrate.
2. Place tumbler and transfer into shrink wrap cylinder.
4. Using the heat gun carefully direct hot air onto the shrink wrap until
tight around the tumbler and transfer.
5. Place tumbler in oven with recommended settings listed above.
6. Pull from oven and remove wrap and paper. Caution: contents will be hot
use heat resistant gloves for safety.


Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (30-45 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots reduce the dwell time slightly (30-45 seconds).